We don't post refret pictorials unless there is something special or unusual about the procedure or the guitar. Recently we received a Bowes 7 string and the owner wanted a refret with 6100 stainless [...]
We have had a number of these projects come in recently, enough to call for making a permanent jig to rout with. These pups sound great. They are on the high side dollar wise but [...]
This is not totally inclusive of everything that applies or it would be three times as long. I rewrote this to try and shorten it but give you specifics about [...]
A fine Schecter in for a 6100 stainless steel refret and installation of face dots. A very satisfying job.
Here is a Jackson refret. These are fine guitars and this refret came out very well.
Many customers wanting a stainless steel refret done on their torrified or roasted maple necks have concerns about chipping and brittleness. No worries. We have done many of them. Roasted maple is brittle but [...]
Finally! After many months of upgrading our CNC we are starting back up. We decided to run the Tele control plates as our first exercise. They came out great and will give most any [...]
Here is a question I get asked quite often so I though I would post it. "Can you refret my 7.25" radius neck and file the frets down flatter so I can play lead [...]
Many people ask how to make a neck because they want to build one themselves. I encourage that so I made a video. It is incomplete but shows the steps needed to do it. Over [...]